YOKOGAWA wt1600 User Manual page 102

5.15 NUMeric Group
:NUMeric:HARMonics:NUMber
Function Sets the number of the numerical data that is
transmitted by ":NUMeric:HARMonics:
VALue?" or queries the current setting.
Syntax :NUMeric:HARMonics:NUMber {<NRf>|
ALL}
:NUMeric:HARMonics:NUMber?
<NRf> = 1 to 255 (ALL)
Example :NUMERIC:HARMONICS:NUMBER 15
:NUMERIC:HARMONICS:NUMBER ->
:NUMERIC:HARMONICS:NUMBER 15
Description • If the parameter is omitted for the
":NUMeric:HARMonics:VALue?"
command, the numerical data from 1 to (the
specified value) is output in order.
• By default, the number of numerical data is
set to "15."
:NUMeric:HARMonics:PRESet
Function Presets the output item pattern of numerical
data for harmonic measurement.
Syntax :NUMeric:HARMonics:PRESet {<NRf>}
<NRf> = 1 to 4
Example :NUMERIC:HARMONICS:PRESET 1
Description • For details on the output items that are
preset, see "(2) Preset Pattern of Output
Items of Harmonic Measurement Numerical
Data."
• By default, output items of "Pattern 2" is
selected.
:NUMeric:HARMonics:VALue?
Function Queries the numerical data for harmonic
measurement.
Syntax :NUMeric:HARMonics:VALue? {|<NRf>}
<NRf> = 1 to 255 (item number)
Example • Example when <NRf> is specified
:NUMERIC:HARMONICS:VALUE? 1 ->
104.75E+00
• Example when <NRf> is omitted
:NUMERIC:HARMONICS:VALUE? ->
104.75E+00,0.9584E+00,72.01E+00,
..(omitted)..,50.086E+00
• Example in which ":NUMeric:FORMat" is set
to "Float"
:NUMERIC:HARMONICS:VALUE? ->
#4(Number of bytes, 4 digits)(Series of data
bytes)
Description • If <NRf> is specified, only the numerical data
of the item number is output.
• If <NRf> is omitted, the numerical data of item
numbers from 1 to ":NUMeric:HARMonics:
NUMber" is output in order.
• For the format of the individual numerical data
that is output, see "Numerical Data Format" at
the end of this group (section).
5-68
:NUMeric:LIST?
Function Queries all settings related to the numerical
data list output for harmonic measurement.
Syntax :NUMeric:LIST?
Example :NUMERIC:LIST? -> :NUMERIC:LIST:
ORDER 100;SELECT ALL;ITEM U,1
:NUMeric:LIST:ITEM
Function Sets the output items of the numerical data list
for harmonic measurement or queries the
current setting.
Syntax :NUMeric:LIST:ITEM {<Function>,
<Element>}
:NUMeric:LIST:ITEM?
<Function> = {U|I|P|S|Q|LAMBda|...}
(See the function selection list (3) of "DISPlay
group.")
<Element> = {<NRf>|SIGMA|SIGMB|
SIGMAC}
(<NRf> = 1 to 6)
Example :NUMERIC:LIST:ITEM U,1
:NUMERIC:LIST:ITEM? -> :NUMERIC:
LIST:ITEM U,1
:NUMeric:LIST:ORDer
Function Sets the maximum output order of the numerical
data list for harmonic measurement or queries
the current setting.
Syntax :NUMeric:LIST:ORDer {<NRf>|ALL}
:NUMeric:LIST:ORDer?
<NRf> = 1 to 100 (ALL)
Example :NUMERIC:LIST:ORDER 100
:NUMERIC:LIST:ORDER? -> :NUMERIC:
LIST:ORDER 100
: N U M e r i c : L I S T : S E L e c t
Function Sets the output component of the numerical
data list for harmonic measurement or queries
the current setting.
Syntax :NUMeric:LIST:SELect {EVEN|ODD|ALL}
:NUMeric:LIST:SELect?
Example :NUMERIC:LIST:SELECT ALL
:NUMERIC:LIST:SELECT? -> :NUMERIC:
LIST:SELECT ALL
IM 760101-11E