YOKOGAWA wt1600 User Manual page 108

5.17 STATus Group
:STATus?
Function Queries all settings related to the
communication status function.
Syntax :STATus?
Example :STATUS? -> :STATUS:EESE 0;FILTER1
NEVER;FILTER2 NEVER;FILTER3 NEVER;
FILTER4 NEVER;FILTER5 NEVER;
FILTER6 NEVER;FILTER7 NEVER;
FILTER8 NEVER;FILTER9 NEVER;
FILTER10 NEVER;FILTER11 NEVER;
FILTER12 NEVER;FILTER13 NEVER;
FILTER14 NEVER;FILTER15 NEVER;
FILTER16 NEVER;QENABLE 0;QMESSAGE 1
:STATus:CONDition?
Function Queries the contents of the condition register.
Syntax :STATus:CONDition?
Example :STATUS:CONDITION? -> 16
Description For the description regarding how to
synchronize the program using :STATus:
CONDition, see page 4-8.
:STATus:EESE
(Extended Event
Function Sets the extended event enable register or
queries the current setting.
Syntax :STATus:EESE <Register>
:STATus:EESE?
<Register> = 0 to 65535
Example :STATUS:EESE #B0000000000000000
:STATUS:EESE? -> :STATUS:EESE 0
:STATus:EESR?
(Extended Event
Function Queries the content of the extended event
register and clears the register.
Syntax :STATus:EESR?
Example :STATUS:EESR? -> 0
:STATus:ERRor?
Function Queries the error code and message
information (top of the error queue).
Syntax :STATus:ERRor?
Example :STATUS:ERROR? ->
113,"Underfined Header"
Description • When there is no error, "0, "No error"" is
returned.
• The message cannot be returned in
Japanese.
• You can specify whether or not to add the
message using the "STATus:QMESsage"
command.
5-74
Status Enable
Status Register)
:STATus:FILTer<x>
Function Sets the transition filter or queries the current
setting.
Syntax :STATus:FILTer<x> {RISE|FALL|BOTH|
NEVer}
:STATus:FILTer<x>?
<x> = 1 to 16
Example :STATUS:FILTER2 RISE
:STATUS:FILTER2? -> :STATUS:
FILTER2 RISE
Description Specify how each bit of the condition register is
to change to set the event. If "RISE" is specified,
the event is set when the bit changes from "0" to
"1."
:STATus:QENable
Function Sets whether or not to store messages other
than errors to the error queue (ON/OFF) or
queries the current setting.
Syntax :STATus:QENable {<Boolean>}
:STATus:QENable?
Example :STATUS:QENABLE ON
:STATUS:QENABLE? -> :STATUS:
QENABLE 1
register)
:STATus:QMESsage
Function Sets whether or not to attach message
information to the response to the
"STATus:ERRor?" query (ON/OFF) or queries
the current setting.
Syntax :STATus:QMESsage {<Boolean>}
:STATus:QMESsage?
Example :STATUS:QMESSAGE ON
:STATUS:QMESSAGE? -> :STATUS:
QMESSAGE 1
:STATus:SPOLI?
Function Executes serial polling.
Syntax :STATus:SPOLl?
Example :STATUS:SPOLL? -> :STATUS:SPOLL 0
Description This is a command specific to the serial (RS-
232) interface. An interface message is
available for the GP-IB interface.
(Serial Poll)
IM 760101-11E