YOKOGAWA wt1600 User Manual page 69

:FILE:DRIVe
Function Sets the target drive.
Syntax :FILE:DRIVe {FD0|
SCSI,<NRf>[,<NRf>]|ND0}
FD0 = Floppy disk
SCSI = SCSI device
1st <NRf> = SCSI address (0 to 7)
2nd <NRf> = Partition (0 to 9)
ND0 = Network drive
Example :FILE:DRIVE FD0
Description If the drive does not contain partitions, omit the
2nd <NRf>.
:FILE:FORMat
Function Executes the floppy disk format.
Syntax :FILE:FORMat {HD14}
Example :FILE:FORMAT HD14
:FILE:FREE?
Function Queries the free space (bytes) on the target
drive.
Syntax :FILE:FREE?
Example :FILE:FREE? -> 163840
:FILE:LOAD:ABORt
Function Aborts file loading.
Syntax :FILE:LOAD:ABORt
Example :FILE:LOAD:ABORT
:FILE:LOAD:SETup
Function Loads the setup parameter file.
Syntax :FILE:LOAD:SETup {<Filename>}
Example :FILE:LOAD:SETUP "SETUP1"
Description • Specify the file name without the extension.
• This is an overlap command.
: F I L E : M D I R e c t o r y
Function Creates the directory.
Syntax :FILE:MDIRectory {<Filename>}
<Filename> = Directory name
Example :FILE:MDIRECTORY "TEST"
:FILE:PATH?
Function Queries the absolute path of the current
directory.
Syntax :FILE:PATH?
Example :FILE:PATH? -> "FD0\IMAGE"
IM 760101-11E
:FILE:SAVE?
Function Queries all settings related to the saving of files.
Syntax :FILE:SAVE?
Example :FILE:SAVE? -> :FILE:SAVE:
ANAMING 1;COMMENT "";WAVE:
TYPE BINARY;:FILE:SAVE:NUMERIC:
TYPE ASCII;NORMAL:ELEMENT1 1;
ELEMENT2 0;ELEMENT3 0;ELEMENT4 0;
ELEMENT5 0;ELEMENT6 0;SIGMA 0;
SIGMB 0;SIGMC 0;URMS 1;UMN 1;UDC 1;
UAC 1;IRMS 1;IMN 1;IDC 1;IAC 1;P 1;
S 1;Q 1;LAMBDA 1;PHI 1;FU 1;FI 1;
UPPEAK 1;UMPEAK 1;IPPEAK 1;
IMPEAK 1;CFU 1;CFI 1;FFU 1;FFI 1;
Z 1;RS 1;XS 1;RP 1;XP 1;PC 1;
TIME 0;WH 0;WHP 0;WHM 0;AH 0;AHP 0;
AHM 0;ETA 0;SETA 0;F1 0;F2 0;F3 0;
F4 0;DURMS 0;DUMN 0;DUDC 0;DUAC 0;
DIRMS 0;DIMN 0;DIDC 0;DIAC 0
:FILE:SAVE:ABORt
Function Aborts file saving.
Syntax :FILE:SAVE:ABORt
Example :FILE:SAVE:ABORT
:FILE:SAVE:ANAMing
Function Sets whether to automatically name the files to
be saved or queries the current setting.
Syntax :FILE:SAVE:ANAMing {<Boolean>}
:FILE:SAVE:ANAMing?
Example :FILE:SAVE:ANAMING ON
:FILE:SAVE:ANAMING? -> :FILE:SAVE:
ANAMING 1
:FILE:SAVE:COMMent
Function Sets the comment to be added to the file to be
saved or queries the current setting.
Syntax :FILE:SAVE:COMMent {<String>}
:FILE:SAVE:COMMent?
<string> = 30 characters or less
Example :FILE:SAVE:COMMENT "CASE1"
:FILE:SAVE:COMMENT? -> :FILE:SAVE:
COMMENT "CASE1"
5.6 FILE Group
5
5-35