Connecting The Wt To A Pc - YOKOGAWA wt1600 User Manual

3.3

Connecting the WT to a PC

Ethernet Control Settings
Procedure
ESC
IM 760101-11E
See section 13.1, "Connecting the WT1600 to a PC" in user's manual IM760101-01E.
Select the communications interface to be used for controlling the WT.
1. Press MISC to display the Misc menu.
2. Press the Communication soft key to display the Comm menu.
3. Press the Comm Device soft key to display the Comm Device menu.
4. Press the Network soft key. Doing so selects Ethernet as the interface for
controlling the WT.
For Suffix Code -C1 (GP-IB)
ESC
Note
Only the communications interfaces selected under Device are available. If commands are sent
using an unselected communications interface, the command will not be received.
Setting the User Name and Password
Note
When the FTP server function is specified (see section 13.1 of user's manual IM760101-01E), the
user account and password are entered separately. We recommend that you use the same
settings as for the FTP server.
5. Press the User Account soft key to display the User Account dialog box.
6. Turn the jog shuttle to select User Name.
7. Press SELECT to display the keyboard.
8. Use the keyboard to enter the user name.
For instructions on keyboard operations, see section 3.12 "Entering Values and
Strings" in user's manual IM760101-01E.
9. Turn the jog shuttle to select Password. The password setting is entered twice.
10. Press SELECT to display the keyboard.
11. Use the keyboard to enter the password. Password is not required if the user
name is anonymous.
For instructions on keyboard operations, see section 3.12 "Entering Values and
Strings" in user's manual IM760101-01E.
Setting the Timeout Time
12. Turn the jog shuttle to select Time Out.
13. Press SELECT to display the timeout time selection box.
For Suffix Code -C2 (Serial)
ESC ESC
3
ESC
3-3