Package Supplied; Nameplate - Kollmorgen SERVOSTAR 640 Instruction Manual

Kollmorgen
5 Package
5.1

Package supplied

When you order a SERVOSTAR 640/670 series amplifier (order codes ð p.115), you will receive:
—
—
The mating SubD connectors are not part of the package!
—
—
—
Accessories: (must be ordered separately; description see accessories manual)
—
—
—
—
—
—
—
—
—
5.2

Nameplate

The nameplate depicted below is attached to the side of the servo amplifier.
The information described0 below is printed in the individual fields.
Servo amplifier type
®
SERVOSTAR 640/670 Instructions Manual
SERVOSTAR 640/670
mating connectors X3, X4
Assembly and Installation Instructions (product manual)
Online documentation on CD-ROM
Setup software DRIVE.EXE on CD-ROM
Mains filter 3EF required
Mains choke 3L required
AC Servomotor (linear or rotary)
motor cable as a cut-off length
brake cable as a cut-off length
feedback cable (pre-assembled) or
both feedback connectors separately, with feedback cable as length
external brake resistor BAS, usually required
communications cable to the PC (ð p.68) or Y-adapter (ð p.90) for parameter setting of up
to 6 servo amplifiers from one PC
power cable, control cables, fieldbus cables (as lengths)
max. ambient
temperature
12/2010
Serial number
Electrical supply
Installed load
Comments Enclosure Rating
C
LISTED
IND. CONT. EQ.
Output current
Hardware Revision
in S1 operation
Package
U L
US
®
1VD4
17