Changing The Program; Safety Information - Siemens easyPocket User Manual

Hide thumbs Also See for easyPocket:
Table of Contents

Advertisement

Available languages

Available languages

Changing the program

• Make sure the distance between your remote control and
hearing instrument does not exceed 40 inches (1 meter).
• If you are wearing two hearing instruments, the program will be
changed on both instruments at the same time.
Each time you press the program button, your hearing
instruments switch to the next program, confirming each change
with an acoustic signal (if programmed this way by your Hearing
Care Professional).
Example: The hearing instruments are in program 1. You want to
change to program 2.
• Press the program button once. You will hear an acoustic signal.
You are now in program 2.
l
20
Program button

Safety information

WARNING
Wireless systems may interfere with measuring devices and
electronic equipment.
• Do not use remote control in hospitals or airplanes.
• Have the key lock activated in hospitals or airplanes.
• Have the ePen tip closed in hospitals or airplanes.
WARNING
Pacemaker compatibility
Siemens remote control devices have been tested and found
not to cause interference with cardiac pacemakers that are
manufactured and operated in compliance with applicable safety
standards, provided a minimum distance of 12 inches (30cm) is
maintained between the remote control and the pacemaker. To
accommodate this provision:
• Do not activate the remote within 12 inches of the pacemaker.
• Do not carry the remote in your breast pocket.
• Do not wear the remote with a lanyard around your neck.
• Do not place remote directly on the skin over the implanted
pacemaker.
Following these precautions, Siemens remote controls can be
operated safely by, or within the vicinity of, individuals fitted with
these pacemakers.
• For all active implants or life supporting systems other than a
pacemaker: prior to use, have the electromagnetic compatibility
verified.
21

Advertisement

Chapters

Table of Contents
loading

Table of Contents