Displaying The Cpu Usage Statistics; Displaying The Mpu Memory Usage - HP HSR6800 Installation Manual

Table 12 Command output
Field
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
The operation is not supported on
the specified board or subslot

Displaying the CPU usage statistics

Use the display cpu-usage command to display the CPU usage statistics for all cards.
<Sysname> display cpu-usage
Slot 0 CPU usage:
2% in last 5 seconds
2% in last 1 minute
1% in last 5 minutes
Slot 5 CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 13 Command output
Field
Slot 0 CPU usage
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes

Displaying the MPU memory usage

Use the display memory command to display the active MPU memory information.
Description
Card type.
Card serial number.
MAC address of the card:
•
An MPU has a MAC address.
•
An LPU does not have a MAC address, and the field displays NONE.
Manufacturing date of the card.
The display device manuinfo command is not supported on a card that is
virtualized through the MPU.
Description
CPU usage of the card in slot 0.
If the card in the slot has multiple CPUs, "Slot 0 CPU usage" displays the
usage of the master CPU of the card in slot 0, and "Slot 0 CPU 1 CPU
usage" displays the usage of the auxiliary CPU of the card in slot 0.
After a boot, the system calculates and records the average CPU usage rate
every five seconds.
This field displays the average CPU usage rate in the last five seconds.
After a boot, the system calculates and records the average CPU usage rate
every one minute.
This field displays the average CPU usage rate in the last minute.
After a boot, the system calculates and records the average CPU usage rate
every five minutes.
This field displays the average CPU usage rate in the last five minutes.
59