Housing Contact - Honeywell IQ8Control C Installation Instruction

Fire Alarm Control Panel IQ8Control C/M

4.3.3 Housing contact

Housing
open
V2
X7 X8
8 1
7 2
6 3
5 4
set
jumper
set
jumper
Fig. 34: Housing contact
The cover contact must be opened when the service PC is connected, otherwise connection of the
PC is not recognised by the central unit.
40
Depending on the panel housing used, up to four cover contacts can
be connected to the connection terminals of the Basic module.
A single contact per housing is integrated by factory settings.
The opened housing contact is indicated by the illuminated LED V2.
Connection of one housing contact
Connection of two housing contacts
Connection of three housing contacts
Connection of four housing contacts
FB 798951.GB0 / 01.09