Extension Housing For Two Batteries (Part No. 789300 / -01) - Honeywell IQ8Control C Installation Instruction

Fire alarm control panel
Hide thumbs Also See for IQ8Control C:
Table of Contents

Advertisement

Fire Alarm Control Panel IQ8Control C/M

15.1 Extension housing for two batteries (Part No. 789300 / -01)

Up to 2 batteries 12 V / 24 Ah may be placed inside the lower housing part of the IQ8Control M or in the
extension housing (part no. 783000 / -01). The required battery fastener (plastic device) is delivered with the
panel equipment.
Fig. 108: Mechanical battery in the housing of the IQ8Control M or in the Extension housing
Damage to the system!
Please note that depending on the rechargeable batteries used, a significant weight must be
supported by the fastening screws of the extension housing. It is not permissible to install the
rechargeable batteries without these fastening clamps.
Refer Chapter 4.1.3 „Emergency power supply".
134
Place batteries as shown and insert fastener.
Assemble the additional battery mount
pushing in.
1
by
FB 798951.GB0 / 01.09

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq8control m

Table of Contents