The function menu of the installer level appears with four menu points:
The function menu of the installer level with its four menu points appears after the successful entry of the
authorisation code:
Installer
1 Primary loop functions
2 Detector simulation
3 Control simulation
4 Printer function
Escape
Fig. 81: Function menu
Pressing the Escape function key exits the installer level to the status display.
1. Primary loop function
•
Switching on/resetting a primary loop
•
Switching off a primary loop
•
Test operation of an analog loop
•
Detector replacement in an analog loop
2. Detector simulation
•
Alarm simulation of a fire detector
•
Pre-alarm simulation of a fire detector
•
Trouble simulation of a fire detector
•
End test (simulation)
3. Control simulation
•
Activate simulation of a control (relay/open collector output)
•
Trouble simulation of a control (relay/open collector output)
•
End test (simulation)
4. Printer functions
•
Switching off the internal or external protocol printer
•
Switching on the internal or external protocol printer
•
Print out the event memory / repeat printout
•
Display event memory
FB 798951.GB0 / 01.09
Event mem.
Select
Fire Alarm Control Panel IQ8Control C/M
97