Honeywell IQ8Control C Installation Instruction page 104

Fire Alarm Control Panel IQ8Control C/M
8.6 Query of additional and info texts of other control panels
(remote text)
With this function, the programmed additional and info text for controls, detector zones or detectors of any Fire
Alarm Control Panel in the essernet
can also be carried out by the operator. If an event is imminent for which additional or info text has been
programmed, this is automatically displayed as remote text.
1. ACTIVATED Control : 015
1. ACTIVATED Control : 001
Operator
Fig. 89: Status display with the " Rem. Text" menu point
Text request from
control panel XX
Fig. 90: Access to programmed additional and info text
If additional or info text has not been programmed for this detector or control in the other Fire
Alarm Control Panel, an empty line is displayed by the >Rem.text< function.
104
®
network can be queried and shown on the display. This remote text query
10:10
10:16
Rem. Text
Func. menu
22.07
22.07
FB 798951.GB0 / 01.09