Honeywell IQ8Control C Installation Instruction page 32

Fire Alarm Control Panel IQ8Control C/M
Mechanical battery fasteners
Fig. 26: Mechanical battery fasteners e.g. compact housing IQ8Control C
Fig. 27: Mechanical battery in the housing of the IQ8Control M or in the extension housing
Damage to the system!
Please note that depending on the rechargeable batteries used, a significant weight must be
supported by the fastening screws of the extension housing. It is not permissible to install the
rechargeable batteries without these fastening clamps.
32
Up to 2 batteries may be place inside the compact
housing. The required batteries fastener (plastic
device) is delivered with the panels equipment.
1
•
Place batteries as shown and insert fastener.
•
Fix the mechanical battery fastener by inserting
the two screws
Up to 2 batteries 12 V / 24 Ah may be placed inside
the lower housing part of the IQ8 Control M or in the
extension housing (part no. 783000 / 01). The
required battery fastener (plastic device) is delivered
with the panel equipment.
•
Place batteries as shown and insert fastener.
1
•
Assemble the additional battery mount
pushing in.
.
FB 798951.GB0 / 01.09
by