Honeywell IQ8Control C Installation Instruction page 105

8.7 Printer function
Under this menu point, the protocol printer connected to the Fire Alarm Control Panel (internal printer and/or
external serial printer) can be switched on or off. In addition, the contents of the internal event memory of the
control panel can be printed out on a local protocol printer.
The activation of other control panel printers in the essernet
Internal protocol printer
The internal protocol printer is selected with a (max.) four-digit number. This number consists of the control
panel number (e.g. 1 to 31 in an essernet
Example: panel number 01
panel number 05
External protocol printer
The external protocol printer is selected by the primary loop number of the interface micro module (RS 232/TTY
module) to which the printer is connected. The number of the interface module consists of the number of the
Fire Alarm Control Panel, the micro module board and the slot in which the RS232/TTY-Module is fitted in the
same way as the primary loop number.
Switching off the protocol printer
By the first activation of the menu options >Printer function<, the printer number is automatically allocated to the
internal protocol printer if installed. This allocation can be removed by pressing the >Zone< key.
Printer
:
Printer
Func.menu
Fig. 91: Function menu
•
Enter the number of the printer which is to be switched off (primary loop number of the serial interface) and
press the >Select< function key
•
Enter the number of the desired function (1 = Switching off) or select the menu options Switching off with
the cursor keys and press the >Function< key
FB 798951.GB0 / 01.09
®
network) and the number "01".
Nr. of the internal protocol printer 01 10
Nr. of the internal protocol printer 05 10
Switch off
Switch on
Print event mem
Repeat
Fire Alarm Control Panel IQ8Control C/M
®
network is impossible.
Select
105