Honeywell IQ8Control C Installation Instruction page 15

Three part housing with integrated printer
The integrated printer and the operating module front are mounted in the upper housing. Due to the depth of the
printer, the Basic module and all of the plug-in cards are integrated into a separate housing beneath. The
emergency power supply with max. two 24Ah batteries can be installed into the lowest housings.
Fig. 9: Three part housing with integrated printer
1
1
2 3
4
Fig. 10: Location of the components in a three part housing
Ensure that the arrangement of the assemblies corresponds with the presentation shown here during
this configuration. Another distribution is not possible due to the cable length of the operating module
front, the integrated printer and the battery connection cable.
FB 798951.GB0 / 01.09
Fire Alarm Control Panel IQ8Control C/M
Extension housing 789304
or
Extension housing 789303
Assembly area for esserbus
Basic module / power supply module /
slot for micro module
Alternatively Field device module
(without micro module slot)
or Field device module (with 1 micro module slot)
or Extension module (with 1 micro module slot)
or Extension module (with 3 micro module slots)
on slot 1
Extension module (with 3 micro module slots)
on slot 2
®
transponders
Part No. 772479
Part No. 772477
Part No. 772478
Part No. 772476
Part No. 772476
15