®
VLT
HVAC Drive Design Guide
5.2.8. Access to Control Terminals
All terminals to the control cables are located underneath the terminal cover on the front of the
frequency converter. Remove the terminal cover by means of a screwdriver (see illustration).
Illustration 5.12: A1, A2 and A3 enclosures
5.2.9. Control Terminals
Drawing reference numbers:
1.
2.
3.
4.
10 pole plug digital I/O.
3 pole plug RS485 Bus.
6 pole analog I/O.
USB Connection.
®
MG.11.B2.02 - VLT
is a registered Danfoss trademark
Illustration 5.13: A5, B1, B2, C1 and C2 enclosures
Illustration 5.14: Control terminals (all enclosures)
5. How to Install
5
93