Access To Control Terminals; Electrical Installation, Control Terminals - Danfoss VLT HVAC Drive FC 102 Operating Instructions Manual

Electrical Installation
4 4
Illustration 4.8 Control Card Wiring Path for Frame Size E9
36
Operating Instructions
1 Routing path for the control card wiring, inside the frequency

4.8.2 Access to Control Terminals

All terminals for the control cables are located beneath the
LCP (both filter and frequency converter LCPs). They are
accessed by opening the door of the unit.
4.8.3 Electrical Installation, Control
To connect the cable to the terminal:
Danfoss A/S © Rev. 2014-07-29 All rights reserved.
converter enclosure.
Illustration 4.9 Control Card Wiring Path for Frame Size F18
Terminals
1. Strip insulation by about 9–10 mm
1
MG16I202