Table of Contents
Advertisement
2.4 Event traces
Signal types
In addition to the four logic inputs (extra code), digital signals generated by the
instrument itself can also be displayed in the six event traces:
Signal
Logic input 1 — 4
Logic channel 1 — 6
Low alarm 1 — 6
Low combination alarm
High alarm 1 — 6
High combination alarm
Counter/integrator alarm 1 — 6
Counter/integrator
combination alarm
Combination alarm
Memory alarm
Error
Modbus-Flag
Representation
Representation on the screen is as follows:
Representation
as symbol
as diagram
All manuals and user guides at all-guides.com
2 Instrument description
Description
Four logic inputs present in hardware
(extra code)
Channels which are created by using the math
and logic module (instrument software version
133.03.xx or higher and extra code are required)
Underlimit of channels
OR linkage of all low alarms
Overlimit of channels
OR linkage of all high alarms
Limit infringements of counter/integrator
channels (instrument software version 133.03.xx
or higher and extra code are required)
OR linkage of all counter/integrator
alarms (instrument software version 133.03.xx or
higher and extra code are required)
OR linkage of all low and high alarms
Alarm is triggered when the residual capacity of
the diskette, or the available internal storage spa-
ce, falls below a certain value.
Chapter 3.6 "Disk manager"
Alarm when the battery is discharged, or the time
has to be reset.
Chapter 3.7 "Instrument info"
Control flag which can be activated through the
serial interface.
On/Off represented as switch:
Representation as time sequence:
13
Advertisement
Table of Contents
