Separating Copies By Sets ("Sort" Setting) - Konica Minolta bizhub C250 User Manual

3

Separating copies by sets ("Sort" setting)

0 The factory default setting is "Group".
0 If "Offset" is selected while no finisher is installed, printed copies will be
fed out and sorted in an alternating crisscross pattern if the following
conditions are met.
0 8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
0 Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
0 The "Auto Paper Select" setting is selected.
0 The "Auto Paper Select" setting is not selected when the "Mixed Original"
setting is selected.
0 If "Offset" is selected while a finisher is installed, printed copies are fed
out and stacked on top of each other with each set shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Sort].
– To separate each set of copies, touch [Offset].
– To specify the output tray, when the finisher FS-514 is installed,
touch the button for the desired tray under "Output Tray".
3
Touch [OK].
The Basic screen appears again.
3-70
Basic copy operations
C250