Separating Copies By Sets ("Sort" Setting) - Konica Minolta BIZHUB C203 User Manual
Hide thumbs
Also See for BIZHUB C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
3
3.12.1
Separating copies by sets ("Sort" setting)
0
As the factory default, "Group" is selected.
0
If offset sorting is selected while no finisher or separator is installed, printed copies will be fed out and
sorted in an alternating w and v pattern if the following conditions are met.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w orientation in one paper tray and with the v
orientation in another tray.
The "Auto" Paper setting is selected.
The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
0
If offset sorting is selected while a finisher or a separator is installed, printed copies are fed out and
stacked on top of each other with each set shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Sort].
–
To separate each set of copies, touch [Yes] under "Offset".
3
Touch [OK].
The Basic screen appears again.
3-54
Copy Operations
bizhub C203/C253/C353
Advertisement
Table of Contents
