OEM Feature,
Continued
PCI
Delay for PCI Config Cycle
Add the delay if you have initialization problems or slow PCI devices.
Accept Class Code FF
Some PCI boards use the class code FFh. Boards with Class Code FF are distributed by
some vendors in the knowledge that there will be different handling of such devices. The
standard does not define configuration rules for class code FF. By setting this field to
"Yes", these non-standard boards will also be configured by the BIOS.
Reset from System Master
When enabled, the board will make a reset performed from the System Master. This item
is shown when the board is connected to a peripheral slot.
PCI-to-PCI Bridge Reset
The BIOS performs a PCI-to-PCI bridge reset using a software reset mechanism.
Chapter 8: OEM Feature
45