Boot Setup, Continued; Boot Settings Configuration; Quick Boot; Add-On Rom Display Mode - Kontron CP6500-V User Manual

Boot Setup,
Continued

BOOT SETTINGS CONFIGURATION

Boot Settings Configuration
Use this screen to select options for the Boot Settings Configuration. Use the up and
down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the
value of the selected option. The settings are described on the following pages. The
screen is shown below.

Quick Boot

The Optimal and Fail-Safe default setting is Disabled.
Option Description
Disabled Set this value to allow the BIOS to perform all POST tests.
Enabled Set this value to allow the BIOS to skip certain POST tests to boot faster.

Add-On ROM Display Mode

Set this option to display add-on ROM (read-only memory) messages. The Optimal and
Fail-Safe default setting is Force BIOS. An example of this is a SCSI BIOS or VGA
BIOS.
Option Description
Force BIOS Set this value to allow the computer system to force a third party BIOS to display during system
boot. This is the default setting.
Keep Current Set this value to allow the computer system to display the CP6500-V information during system
boot.
32 Chapter 5: Boot Setup