Smarc-Samx8 Feature Set; Table 2: Smarc-Samx8 Feature Set - Kontron SMARC-sAMX8 User Manual

2.4. SMARC-sAMX8 Feature Set

Table 2: SMARC-sAMX8 Feature Set

SMARC™ SMARC™
Feature Specification
specification Maximum Number
Possible
LVDS Display 1 (2-channel)
support
CSI Camera 2
support
DSI Display 2
support
HDMI/DP 1
eDP 1
USB Interface 6 x USB 2.0
with 2 x USB 3.0
included
PCIe Interface 4
SATA Interface 1
GbE Interface 2
SDIO Interface 1
SPI Interface 2
I2S Interface 2
I2C Interface 5
CAN 2
UART 4
GPIOs
1. If all the PCIe port are used, one of the root port will be in x2 (Port A and B) and the one from the PCIe port C in
PCIe x1 for a total of "3 lanes" with a maximum of 2 devices.
www.kontron.com
SMARC-sAMX8 Description
Feature support
1x (2-channel) 2 x LVDS Channel
(Channel1 shared with DSI)
2x 1 x MIPI CSI with 2 lanes
1 x MIPI CSI with 4 lanes
1x 1x MIPI DSI
(shared with LVDS Channel 1)
1x 1x HDMI/DP Combo PHY
1x 1x eDP/DP via bridge chip
4x USB 2.0 via 2x USB OTG ports, 4x USB host ports,
USB Hub 1x USB 3.0 SS
1x USB 3.0 (If WIFI/BT module is installed, USB5
is not accessible)
2x USB2 OTG
(one shared with
USB3.0)
3x 3x PCIe 3.0 lane (2 root ports)
(PCIe C is shared with SATA port)
1x 1x SATA
(SATA is shared with PCIe C)
2x GbE 2x GB Ethernet
1x 1x SDIO interface on SMARC
connector
(There is also one microSD connector
on the module)
2x 1x SPI, 1x QuadSPI
(3 additional SPI instead of LVDS on
Custom SMARC module)
2x Default lead to HDMI
5x External Fast I2C_GP from Embedded
Controller or CPU I2C_PM for Power
Management
2x 2x CAN with CAN-FD support
(1 additional CAN instead of LVDS on
Custom SMARC module)
4x
12x GPIOs
Kontron SMARC-sAMX8 - Rev. 1.2
1
// 15