Advanced BIOS Setup,
REMOTE ACCESS CONFIGURATION
Remote Access Configuration
You can use this screen to select options for the Remote Access Configuration. Use the
up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option. The settings are described on the following
pages. The screen is shown below.
Remote Access
You can disable or enable the BIOS remote access feature here.
Option
Description
Disabled
Set this value to prevent the BIOS from using Remote Access.
Serial
Set the value for this option to Serial to allow the system to use the remote access feature. The
remote access feature requires a dedicated serial port connection.
Chapter 3: Advanced BIOS Setup
Continued
Cont'd
23