Backplane J3 Signals - Kontron CP6500-V User Manual

Functional Description
Warning!
The RIO_XXX signals are power supply outputs from the CPU board to supply
the RIO board with power and must not be supplied with external power.
Failure to comply with the above may result in damage to your board.
The following table describes the signals of the J3 connector.
Table 2-22: Backplane J3 Signals
SIGNAL
SP0 COM1 Signaling (RS232, RS422)
SP1 COM2 Signaling (RS232, RS422, RS485)
Graphic Signaling
VGA
USB0 USB Port Signaling
USB1 USB Port Signaling
KB PS2 Keyboard Signaling
PS2 PS2 Mouse Signaling
SPEAKER Standard PC Speaker
FAN Fan Sensoring
LPa Rear I/O LAN Port B
LPb Rear I/O LAN Port A
Page 2 - 32
DESCRIPTION
© 2005 Kontron Modular Computers GmbH
CP6500-V
ID 28945, Rev. 01