Ip Address Determination - ATEN CN-6000 User Manual

IP Address Determination

If you are an administrator logging in for the first time, you need to access the
CN-6000 in order to give it an IP address that users can connect to. There are
three methods to choose from. In each case, your computer must be on the
same network segment as the CN-6000. If the CN-6000's address was set by
DHCP, Method 3 will show you what the DHCP assigned address is.
After you have connected and logged in you can give the CN-6000 its fixed
network address in the Network Settings dialog box (see p. 15). If you want to
have the CN-6000's address set by DHCP and the address changes, use Method
3 to determine the new address.
Method 1: (For a fixed IP address)
When the CN-6000 starts, if it doesn't find a DHCP environment after 30
seconds, it automatically sets its IP address to 192.168.0.60.
1. Set your computer's IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60.
2. Specify the switch's default IP address (192.168.0.60) in the URL entry box
of your browser.
3. After you connect and log in, assign a fixed IP address for the CN-6000 that
is suitable for the network segment that it resides on.
4. After you log out, be sure to reset your computer's IP address to its original
value.
Appendix
43