ATEN CN-6000 User Manual page 107

An explanation of the settings is given in the following table:
Screen Position
Auto-Sync
RGB
Video Quality
Bandwidth Control
Adjust the horizontal and vertical position of the remote display
by Clicking the Arrow buttons.
Click Auto-Sync to have the function detect the vertical and
horizontal offset values of the remote screen and automatically
synchronize it with the local screen. AutoSync also adjusts the
dimensions of the remote screen. Note that this function works
best with a bright screen.
If you are not satisfied with the results, use the Screen Position
arrows to position the remote display manually.
Drag the slider bars to adjust the RGB (Red, Green, Blue)
values. When an RGB value is increased, the RGB component
of the image is correspondingly increased.
Drag the slider bar to adjust the overall Video Quality. Values
can be from 20 to 100. The larger the value, the clearer the
picture and the more video data goes throught the network.
Depending on the network bandwidth, a high value may
adversely effect response time.
This setting adjusts the ratio between picture quality and network
speed. For slow data connections, drag the slider bar to a lower
setting to decrease the amount of video data transferred. This
ensures screen refresh at workable speeds.
The Windows Client
39