ATEN CN-6000 User Manual page 85

IP Address:
The CN-6000 can either have its IP address assigned dynamically at bootup
(DHCP), or it can be given a fixed IP address.
M
For dynamic IP address assignment, select the Obtain an IP address
automatically, radio button.
M
To specify a fixed IP address:
1. Select the Set IP address manually, radio button and fill in the required
information.
2. Click the Customization tab (at the top of the Settings notebook).
3. On the Customization page (see p. 23), click Reset on exit, then click OK.
The Parameters have been set Message appears (see p. 14). Click OK and
you return to the Administration Utility device selection window (see p.
10)
4. Click Refresh to update the CS-6000's IP Address in the device selection
window.
Log Server:
Important transactions that occur on the CN-6000, such as logins and internal
status messages, are kept in an automatically generated log file.
Specify the MAC address and a Port number for the server you want the log file
to reside on in the Log Server section. The Log Server is discussed in detail in
Chapter 6.
The Administrator Utility
17