Set Ip Port; Ip Address - ATEN VM0808H User Manual

Set IP Port

To configure the VM0808H's IP port settings, from the Menu page, turn the
front panel OUT/IN dial to move the cursor to the Set IP Port position, and use
the OUT, IN, or ENTER pushbutton to select Set IP Port.
Set IP Port
Set Serial Port
The sub-menu provides four options: IP Address; Subnet Mask; Gateway; and
Default IP Settings; as follows:

IP Address

To set the VM0808H's IP address, do the following:
1. Select IP Address from the Set IP Port submenu. The cursor flashes on the
first number:
IP Address: 192.168.0.60
Subnet Mask: 255.255.255.0
2. Turn the front panel IN dial left or right to cycle through and change each
number.
3. Turn the front panel OUT dial left or right to move [ ] the cursor to each
position.
4. Press the OUT, IN, or ENTER pushbutton to confirm the IP address.
5. Press ESC to return to the previous step without change.
Note: The default IP address is 192.168.0.60
Chapter 3. Local Operation
OUT
ESC
MENU
ENTER
PROFILE
OUT
ESC
MENU
ENTER
PROFILE
IN
IN
19