The Connection Screen - ATEN CN-6000 User Manual

CN-6000 User Manual

The Connection Screen

When the Windows Client starts, a Connection Screen, similar to the one below, appears:
A description of the Connection Screen is given in the following table:
Menu Bar
CN6000 List:
CN6000 IP:
Message List:
30
The Menu Bar contains three items: File, Tools, and Help.
1. The File Menu allows the operator to Create, Save, and
Open user created Work files (see p. 40 for details).
2. The Tools Menu is used to define hotkey actions. Look
inside before you Open a connection to see what the
preconfigured Hotkeys are. You can change the values if
you wish (see p. 33 for details).
Each time the Windows Client is run, it searches the User's local
LAN segment for CN-6000 units, and lists whichever ones it
finds in this box. If you want to connect to one of these units,
Double Click it.
This area is used when you want to connect to a CN-6000 at a
remote location. You can drop down the list box and select an IP
address or key in an IP address if the one you want isn't listed,
then key in the Port number in the Port field. If you don't know
the Port number contact the Administrator.
When the IP address and Port number for the CN-6000 unit you
wish to connect to has been specified, Click Connect to start the
connection. When you have finished with your session, Click
Disconnect to break the connection.
Lists status messages regarding the connection to the CN-6000.