The Cn-6000 List Panel - ATEN CN-6000 User Manual

The CN-6000 List Panel

Overview
The CN-6000 List panel (refer back to the figure on p. 52), displays a list of all the
CN-6000 units that have been selected for the Log Server to track (see Configure, p. 53).
Tick information for the currently selected CN-6000 displays in the Events List
panel below. To select a CN-6000 unit in the list, simply click on it.
The CN-6000 List window contains five fields:
Field
Recording
Address
Port
Connection
Limit
Description
Expalanation
Determines whether the the Log Server records the
ticks for this CN-6000, or not. If the Recording
checkbox is checked, the field displays Recording,
and the ticks are recorded. If the Recording checkbox
is not checked, the field displays Paused, and the
ticks are not recorded.
Note: Even though a CN-6000 is not the currently
selected one, if its Recording checkbox is checked,
the Log Server will still record its ticks.
This is the IP Address or DNS name that was given to
the CN-6000 when it was added to the Log Server
(see Configure, p. 53).
This is the Port number assigned to the CN-6000 (see
Configure, p. 53).
If the Log Server is connected to the CN-6000, this
field displays Connected.
If it is not connected, this field displays Waiting. This
means that the Log Server's MAC address has not
been set properly. It needs to be set on the Network
page of the Administrator Utility (see p. 16).
This field displays the number of days that the
CN-6000's events are to be kept in the Log Server's
database before expiration (see Configure, p. 53).
This field displays the descriptive information given for
the CN-6000 when it was added to the Log Server
(see Configure, p. 53).
The Log Server
57