Starting Up - ATEN CN-6000 User Manual

CN-6000 User Manual

Starting Up

To bring up the Administrator Utility Main Screen, Double Click the CN6KAdmin-
Tool icon, or key in the full path to the program on the command line.
If this is the first time that you are running the utility a dialog box appears
requesting you to input your serial number. The serial number can be found on
the bottom panel of the CN-6000. Key in the serial number - 5 characters per box
- then Click OK.
After you correctly specify the serial number, the Administrator Utility main
screen comes up:
Since this is the first time you are running the Utility, you must closeand restart
the program at this point, in order to ensure an accurate reading.
Note: You only need to do this the very first time you run the Utility.
10