Logging In - ATEN CN-6000 User Manual

CN-6000 User Manual

Logging In

Once the Administrator Utility connnects to the unit you specified, a login window
appears:
Only those who have Configuration privileges (see User Management; Permis-
sions, p. 22) are allowed to log in.
Provide a valid Username and Password, then Click Login to continue.
Note: The default Username is administrator; the default Password is
password. You can change these to whatever you prefer (see User
Management, p. 21) after you have logged in.
While the Utility processes the login request, the following message apperars:
Note: If you supplied an invalid login, the authentication routine will return a
message informing you that the "server is busy." This is done as a
security measure to confuse and discourage hackers from trying to
discover a valid Username and Password. If you see this message, try
logging in again being careful with the Username and Password
12