Filtering - ATEN CN-6000 User Manual

CN-6000 User Manual

Filtering

There are a maximum of 100 filters allowed for each category: User IPs; User
MACs; and Administrator MACs. User Station filtered items (IPs and MACs)
can be specified as included or excluded by highlighting the item and clicking
the include or exclude radio button.
M
If the include button is checked, all the addresses within the filter range are
allowed access to the CN-6000; all other addresses are denied access.
M
If the exclude button is checked, all the addresses within the filter range are
denied access to the CN-6000; all other addresses are allowed access.
User Station Filtering - IPs:
To enable IP filtering for User Stations, Click to put a check mark in the IP
Filter enable checkbox.
To add a filter:
1. Select whether to include or exclude the filter.
2. Click Add. A dialog box similar to the one below appears:
3. Specify the filter address in the dialog box, then Click OK.
Each IP filter can consist of a single address, or a range of addresses.
Therefore, a second dialog box similar to the one below appears:
18