The Windows Client; Starting Up - ATEN CN-6000 User Manual

Starting Up

To access the CN-6000 with the Windows Client software:
1. After you log in, Click the Windows Client icon at the left of the web page
(see p. 9).
Note: You must have DirectX 7.0 or higher installed on your computer. If
not, the Client program will not load.
2. In the dialog box that comes up, click Open.
Note: 1. If the browser cannot run the program, save it to disk, instead.
Then, with your browser still open to the CN-6000 web page, run
the file from your disk.
2. If you use the save to disk method, for security purposes, you
cannot simply run a previously downloaded version of the
program. Each time you want to access the CN-6000, you must
log in to the web page with a valid username and password to
download a fresh copy of the program.
3. When a connection to the CN-6000 has been established, a screen similar to
the one below appears:

The Windows Client

Chapter 5.
25