ATEN CN-6000 User Manual page 123

A description of the items is given in the table, below:
Item
New search
Search last results
Search excluding
last results
CN-6000 List
Priority
Start Date
Start Time
End Date
End Time
Pattern
Search
Print
Results
This is one of three radio buttons that define the scope
of the search. If it is selected, the search is performed
on all the events in the database for the selected
CN-6000.
This is a secondary search performed on the events
that resulted from the last search.
This is a secondary search performed on all the events
in the database for the selected CN-6000 excluding the
events that resulted from the last search.
CN-6000 units are listed according to their IP address or
DNS name. Select the unit that you want to perform the
search on from this list. You can select more than one
unit for the search. If no units are selected, the search is
performed on all of them.
Sets the level for how detailed the search results display
should be.
Select the date that you want the search to start from.
The format follows the MM/DD/YYYY convention, and is
numeric, as follows:
9/15/03
Select the time that you want the search to start from.
The format follows the HH:MM:SS convention, and is
numeric, as follows:
5:51:59 PM
Select the date that you want the search to end at.
Select the time that you want the search to end at.
Key in the pattern that you are searching for here. The
multiple character wildcard (%) is supported. E.g., h%ds
would match hands and hoods.
Click this button to start the search.
Click this button to print the search results
Lists the events that contained matches for the search.
Expalanation
The Log Server
55