Configuring The Hotkeys; Video Adjustment - ATEN CN-6000 User Manual

CN-6000 User Manual

Configuring the Hotkeys

If you find the default Hotkey combinations inconvenient, you can configure
them to whatever suits your taste, as follows:
1. Highlight the Action, then Click Start
2. Key in the Function keys (one at a time). The key names appear in the Key
field as you press them.
3. When you have finished keying in your sequence, Click Stop
4. Click Set
5. Repeat for any other actions you wish to set up
Note: You can use the same function keys for more than one action, as long as
the first key is not the same. For example, you can use F1 F2 F3 for
one action; F2 F1 F3 for another; F3 F2 F1 for a third, etc.

Video Adjustment

You can adjust the placement and the picture quality of the remote screen (as
displayed on your local monitor) with the Video Options function. To do so,
either click on the Hammer icon on the OSD Control Panel, or use the Adjust
Video hotkeys (see p. 31). The following screen appears:
32