ATEN CN-6000 User Manual page 53

Method 3: (For a DHCP address)
For computers running Windows, the CN-6000's DHCP generated IP address
can be determined with the AdminTool utility (found on the distribution CD):
1. Double click the AdminTool utility icon on the CD to install the utility on
your computer.
When the installation completes, there is a CN6000 AdminTool icon on
your desktop.
2. Double click the CN6000 AdminTool icon.
The utility searches the network segment for CN-6000 devices, and displays
what it finds in a dialog box similar to the one below:
The DHCP assigned IP address appears in the right hand column of the
CN6000 Devices panel:
Note: 1. If there is more than one device in the list, use the MAC address
to pick the one you want. The CN-6000's MAC address is located
on its bottom panel.
2. If the list is empty, or your device doesn't appear, click Refresh
to refresh the Device List.
3. Click Exit to close the utility.
Appendix
45