ATEN CN-6000 User Manual page 6

CN-6000 User Manual
About This Manual
This User Manual is provided to help you get the most from your CN-6000
system. It covers all aspects of installation, configuration and operation. An
overview of the information found in the manual is provided below.
Overview
Chapter 1, Introduction, introduces you to the CN-6000 System. Its
purpose, features and benefits are described.
Chapter 2, Hardware Setup, presents the front and back panel components,
and explains how to connect the CN-6000 to your server or KVM switch and
the Internet.
Chapter 3, Getting Started, describes how to log into the CN-6000, and the
screen elements that appear on the opening page.
Chapter 4, The Administrator Utility, explains how to connect to the
CN-6000 as an administrator; and how to configure the CN-6000 for operation.
Chapter 5, The Windows Client, explains how to run the Windows Client
Software; how to connect to the CN-6000 and how to remotely control the
connected server (or servers via a KVM switch).
Chapter 6, The Java Client, explains how to run the Java Client Software;
how to connect to the CN-6000 and how to remotely control the connected
server (or servers via a KVM switch).
Chapter 7, The Log File, describes how to use the log file utility to view all
the events that take place on the CN-6000.
An Appendix provides specifications and other technical information
regarding the CN-6000.
vi