Connecting - ATEN CN-6000 User Manual

Switchto
Remote View
Change Password

Connecting

To connect to a CN-6000 unit:
1. If it is in the CN6000 List, Double Click it; if you are using the CN6000 IP
input box, specify the IP address and Port number, then Click Open. A
Login dialog box appears:
2. After you key in a valid Username and Password, Click OK.
The program attempts to contact your selected CN-6000 unit.
Once contact with a CN-6000 has been established, this button
becomes active. Click it to connect and take over console control
of the unit that is attached to the CN-6000. The screen ouput of
the unit appears on your monitor. Your keystrokes and mouse
movements are captured and sent to the CN-6000 to be
executed on the attached unit.
If the CN-6000 is connected to a KVM switch, you can control
the switch and the computers connnected to it just as if you were
connected locally.
This button becomes active after a connection to a CN-6000 unit
has been established. It allows the User to change the password
he logs onto the CN-6000 with.
The Windows Client
31