ATEN CN-6000 User Manual page 39

An explanation of the actions is given in the table, below:
Action
Exit remote location
Adjust Video
Toggle OSD
Toggle mouse display
Adjust mouse
Substitute Alt key
Note: To invoke an action, you must press and release the keys one key at a
time - do not chord the keys.
Break the connection to the CN-6000 and return to local
operation.
Bring up the video adjustment utility.
Toggles the OSD display Off and On.
If you find the display of the two mouse pointers (local and
remote) to be confusing or annoying, you can use this
function to shrink the non-functioning pointer down to a
barely-noticeable tiny circle - which can be ignored. Since
this function is a toggle - use the hotkeys again to bring the
mouse display back to its original configuration.
This utility synchronizes the local and remote mouse
movements following a video resolution change. After
invoking this utility, simply click the local mouse pointer on
top of the remote mouse pointer.
Although all other keyboard input is captured and sent to the
CN-6000, [Alt + Tab] and [Ctrl + Alt + Del] work on your local
computer. In order to implement their effects on the remote
system, a function key is be substituted for the Alt key. If you
substitute the F12 key, for example, you would use [F12 +
Tab] and [Ctrl + F12 + Del].
The Windows Client
Explanation
31