Screen Elements - ATEN CN-6000 User Manual

Screen Elements

The icons arranged horizontally across the top of the page are linked to the
administration utilities, which are used to configure the CN-6000. Your ability
to make configuration changes depends on the permissions associated with
your login information (see User Managment, p. 20). Use of the administrative
functions is discussed in Chapter 4.
The icons arranged vertically down the left side of the page are used to operate
the CN-6000. Their purpose is discussed in the table below:
Icon
Saves the changes you make in the administration dialog boxes
(see the Administration chapter), but does not implement the
changes. The changes only go into effect when you enable Reset
on exit (see p. 22 for details) and log out.
Allows users to connect to the CN-6000 using Windows software,
and to remotely control the connected server (or servers via a
KVM switch).
For platform independence, the Java client allows users that have
Java installed to connect to the CN-6000 and to remotely control
the connected server (or servers via a KVM switch).
If a Power over the NET module is connected to your
installation, clicking this icon will bring up its interface.
All the events that take place on the CN-6000 are recorded in a
log file (see Network p. 15 for details). Clicking this icon displays
the contents of the log file.
Click this icon to log out and end your CN-6000 session.
Note: It is important to log out when you end your session.
Otherwise, you must wait until the timout setting has expired
before the CN-6000 can be accessed again. (See Time out
control under the Customization dialog box, p. 22.)
Purpose
Getting Started
11