Gt - Set Gateway Address; Im - Set Ip Subnet Mask; Ip - Set Ip Address; Lo - Load Connections From Profile - ATEN VM5404D User Manual

VM5404D / VM5808D User Manual
VR – Software version information
Ctrl-Q – Quit
2. GT – Set gateway address
GT
Old gateway address: 192.168.0.1
New gateway address:
3. IM – Set IP subnet mask
IM
Old IP subnet mask: 255.255.255.0
New IP subnet mask:
4. IP – Set IP address
IP
Old IP address: 192.168.0.60
New IP address:
5. LO – Load connections from profile
LO 01
Load profile 01 OK.
6. PW – Change password
PW
Old password: ********
New password:
7. RI – Read what input is connected to nn output
RI 01
Input port 02 04 08 is connected to output port 01
72