Ericsson RX8000 Reference Manual page 499

Name
SAT S2X Upgrade Failed
SAT S2X Not Calibrated
SAT S2X Undefined Internal
Error
SAT S2X Input Level Too High
SAT S2X Failed To Acquire
PLL
SAT S2X Failed To Acquire
Lock
SAT S2X DC Overcurrent
SAT S2X Core Overloaded
SAT S2X Buffer Overflow
EN/LZT 790 0005 R7A
Identifier Description
1412 This alarm is raised when a software
upgrade of the DVB-S2X card has
failed. The alarm can only be reset by
executing a successful software
upgrade.
1413 This alarm is raised if there is a
calibration error on the DVB-S2X card.
Optimal performance is not
guaranteed.
1414 This alarm is raised when there an
internal error reported by the DVB-S2X
card.
1415 This alarm is raised when the DVB-
S2X card experiences an input level
that is too high.
1416 This alarm is raised when DVB-S2X
card fails to acquire Physical Layer
lock (not applicable for DVB-S).
1417 This alarm is raised when DVB-S2X
card fails to acquire lock.
1418 This alarm is raised when a DC
overcurrent is detected on the input of
the DVB-S2X card.
1419 This alarm is raised when the DVB-
S2X card decoder core is loaded too
high.
1420 This alarm is raised when a buffer
mismatch occurs in the DVB-S2X card.
Alarm Identifiers
C-9