Ericsson RX8000 Reference Manual page 210

Using the Equipment
•
•
•
•
•
•
3-170
Active Boot Bank – The S15678 card has 2 banks available to be used for
code download. Code will always download into the inactive bank. This field
shows the current active bank, either 0 or 1.
Alarms – This is a general text field which describes any alarms generated by
the card, these alarms are generated by fault conditions found by the NDS
proprietary block of code. These alarms are:
- TS Not Locked
- Smartcard Removed
- Invalid Smartcard
- Smartcard Comms Failure
- Invalid Image
- Invalid Image In Flash
- Number of Elementary Stream > 8
- Invalid PID Configuration
- Processor Overload
- NDS Card Not Accessible
SW Version – Describes the software version of the NDS CA Card.
SW Build Time – Describes the software build time of the NDS CA Card.
FW Version – Describes the firmware version of the NDS CA Card.
CA Verifier Status – displays the status provided by the Verifier NDS
proprietary code block, this can have the values:
- OK
- Insert Card
- Invalid Card.
- Service Blocked
- Invalid Packet
- Not Authorized
- Hardware Failure
- Blacked Out
- Invalid Card
- Invalid Pairing
EN/LZT 790 0005 R7A