Ip Input Alarm Identifiers - Ericsson RX8000 Reference Manual

Name
Frame Sync Out of Sync
C.2.11

IP Input Alarm Identifiers

Table C.11 IP Input Alarm Identifiers
Name
IPI Ethernet If 1 Down
IPI Ethernet If 1 No Data
IPI Ethernet If 1 IP Conflict
IPI Ethernet If 2 Down
IPI Ethernet If 2 No Data
IPI Ethernet If 2 IP Conflict
IPI Ethernet If 1 and 2 Down
IPI Ethernet If 1 and 2 No Data
Port 1 net util
Port 2 net util
MDI delay factor
MDI loss rate
Out of sync
No response
Wrong FEC format
FIFO overflow
Primary interface not in use
Primary TS not in use
All TSs missing at all input IFs
EN/LZT 790 0005 R7A
Identifier Description
1094 Frame Sync is enabled but is not
synchronized with the current video
frame rate or no signal is detected on
the Frame Sync input.
Identifier Description
1100 Link down on port 1
1101 No data being received on port 1
1102 Assigned IP address conflicts with
other equipment on network
1103 Link down on port 2
1104 No data being received on port 2
1105 Assigned IP address conflicts with
other equipment on network
1106 Link down on both port 1 and 2
1107 Data data is being received on both
port 1 and 2
1108 Network utilization is above threshold
1109 Network utilization is above threshold
1110 The delay factor is greater than set
value
1111 The loss rate is above set value
1112 The card has failed to lock to a valid
TS
1113 No response on link
1114 Wrong FEC format
1115 FIFO overflowed
1116 If redundancy switch to secondary has
occurred
1117 If redundancy switch to secondary TS
has occurred
1118 If no multicast is available
Alarm Identifiers
C-7