Table of Contents
Advertisement
Using the Equipment
Once the card has been configured to be a SKIT variant it cannot be used with any
other variant of NDS CA. Therefore, a SKIT variant NDS Descrambler card cannot
be used for BSkyB descrambling, BSkyB signed code will not work with a SKIT
variant of the card and should not be loaded onto the card.
This card will only fit into the RX8200 platform and is therefore not available in the
RX8300 range of receivers.
3.11.7.6
Configuration
When the unit detects that the card has been fitted all Transport Streams will be
routed through the card. Unscrambled Transport Streams will pass through without
modification. The RX8200 IRD will display a configuration and status web page for
NDS descrambling.
Figure 3.78 CA Web Page (NDS CA Card fitted)
There are no fields that may be edited by the user on this page. Selecting the
Refresh button will ensure that the latest information is displayed from the current
values of the equipment.
To view this page, select the CA tab on the web page. The following fields can be
seen on the web interface:
3.11.7.6.1
Service Status
•
3-168
CA Service Status – This button accesses a further web page which details the
status of the conditional access services being used.
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
