Ericsson RX8000 Reference Manual page 211

Integrated receivers/decoders
Hide thumbs Also See for RX8000:
Table of Contents

Advertisement

3.11.7.7
Front Panel
3.11.7.7.1
Alarms
This is a general text field which describes any alarms generated by the card. These
alarms are generated by fault conditions found by the NDS proprietary block of
code. These alarms are:
3.11.7.7.2
CAS-ID
This menu displays the currently detected CAS-ID (or CA System ID) supplied to the
unit by the CA system. The unit will use this ID to verify the CA type in the incoming
Transport Stream. If a match is found, it should be possible to descramble
components within the selected service.
EN/LZT 790 0005 R7A
TS Not Locked
Smartcard Removed
Invalid Smartcard
Smartcard Comms Failure
Invalid Image
Invalid Image In Flash
Number of Elementary Stream > 8
Invalid PID Configuration
Processor Overload
NDS Card Not Accessible
NDS
5.2.1
NDS
5.2.2
|ALARMS:
|SMARTCARD REMOVED
|CAS ID: 02401
|
Using the Equipment
3-171

Advertisement

Table of Contents
loading

Table of Contents