Table of Contents
Advertisement
10. If the Mainboard code has been selected, the batch file will prompt for the Bank
Note: In most cases it is recommended to only upgrade the Mainboard code to
11. The batch file will feedback information during the upload similar to that shown
EN/LZT 790 0005 R7A
to upload the code in to. The choice is entered in the same way as circled in the
example below followed by pressing Enter.
bank 0; in that way bank 1 may be used as a code backup in the event of a
problem and allow the unit to be recovered.
below:
Using the Equipment
3-389
Advertisement
Table of Contents
