Table of Contents
Advertisement
B.1.1.8
3G SDI Digital Video
Table B.9 Digital Video Output Connectors
Item
Safety status
Connector type
Connector designation
Output standard (USA)
SDI output level
Jitter performance, nominal
B.1.2
Audio Decoding and Output Stage
B.1.2.1
General
The RX8000 Integrated Receiver/Decoder is capable of simultaneously decoding at
least two PES streams of audio from the Transport Stream. Each of the decoders
are identical in operation, but act independently of the other.
Each channel supports extraction of the following types of coded audio from the
Transport Stream as follows:
•
•
•
•
•
•
•
Audio component selection is automatic or may be specified from the User Interface
or remote interfaces. The RX8000 Integrated Receiver/Decoder automatically
detects the audio type of the selected audio component and applies the appropriate
algorithm. Audio component selection is based on the position of the component
descriptor in the PMT. Audio 1 takes the first component and Audio 2 the second.
These may be overridden by selecting User-specified component PIDs.
EN/LZT 790 0005 R7A
MPEG-1, Layer 2 Audio (Musicam): ISO/IEC 13818-3
Dolby Digital AC-3 Audio: ATSC document A/52
AAC Audio
HE-AAC Audio
Linear Audio
Dolby E pass-thru
Enhanced Dolby Digital pass-thru
Specification
SELV
BNC, female, 75 Ω
3G SDI 1
3G SDI 2
3G SDI 3
ANSI/SMPTE 424M
800 mV pk-pk nominal ±10%
SMPTE Recommended Practices RP 192 –1996
Jitter Measurement Procedures in Bit-Serial
Digital Interfaces
Technical Specification
B-11
Advertisement
Table of Contents
