Table of Contents
Advertisement
Using the Equipment
Note: Setting the modulation mode to DVB-S2X and the FEC to AUTO will allow
•
3-68
-
DVB-S
i.
QPSK 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
ii.
8PSK 2/3, 5/6, 8/9
iii. 16QAM 3/4, 7/8
-
DVB-S2
iv. AUTO
v. QPSK 1/2, 1/3, 1/4, 2/3, 3/4, 2/5, 3/5, 4/5, 5/6, 8/9, 9/10
vi. 8PSK 2/3, 3/4, 3/5, 5/6, 8/9, 9/10
vii. 16APSK 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
viii. 32APSK 3/4, 4/5, 5/6, 8/9, 9/10
-
DVB-S2X
ix. AUTO
x. QPSK 4/15, 7/15, 8/15, 9/20, 11/20, 11/45, 13/45, 14/45, 32/45
xi. 8PSK 7/15, 8/15, 13/18, 23/36, 25/36, 26/45, 32/45
xii. 8APSK-L 5/9, 26/45
xiii. 16APSK 3/5, 7/9, 7/15, 8/15, 13/18, 23/36, 25/36, 26/45, 28/45, 32/45,
77/90
xiv. 16APSK-L 1/2, 2/3, 3/5, 5/9, 8/15
xv. 32APSK 2/3, 7/9, 11/15, 32/45
xvi. 32APSK-L 2/3
the DVB-S2X card to automatically detect MODCODs for both DVB-S2 and
DVB-S2X signals. Setting the modulation mode to DVB-S2 and the FEC to
AUTO will restrict the DVB-S2X card to automatically detect MODCODs for
DVB-S2 signals only. DVB-S mode does not support automatic detection of
MODCODs.
LNB Power – Allows the user to ENABLE/DISABLE power to the LNB. This
menu allows different LNB voltages to be set:
-
13 V (Vertical polarization)
-
18 V (Horizontal polarization)
-
Boosted 13 V (Vertical polarization)
-
Boosted 18 V (Horizontal polarization)
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
